Most Mac users will experience years of using a Mac without problems. But like any other computer, Macs are prone to problems that could significantly impact performance. Fortunately, your Mac is equipped with Mac Recovery mode which is very useful to fix some issues. You can also reset Mac password using recovery mode if needed. There are several ways about how to boot Mac into recovery mode. Here, we'll discuss different ways on how to boot Mac into recovery mode so that they will become effective when users are in any emergency.
Important: If you're still covered by Apple's warranty or AppleCare, you should contact Apple support.
Sudo nvram 'recovery-boot-mode=unused' sudo reboot This sets a firmware variable in nvram indicating that you want to start in Recovery mode on the next boot, and then reboots the machine. When done in Recovery mode, run the following from the Terminal in Recovery mode.
- If your Mac doesn't boot in Recovery mode, read this: Mac can't access Recovery mode. We also have this article about doing a clean install of macOS using a bootable drive. What you need in order.
- To use Recovery Mode, reboot or start your Mac and hold the Command and R keys simultaneously on your keyboard as soon as you hear the familiar startup chime. Keep holding as your Mac boots, which may take a few moments depending on its specific configuration. You can release the keys when you see the Apple logo appearing.
- The key to using macOS Recovery is to restart your Mac in a particular way. You boot up the Mac into this recovery mode, and you will probably do it at least a couple of times as you sort out.
- The Option key during reboot works though. Since installing HSierra, when pressing Option at reboot, I have noticed that the Mac drive now shows up to the right of the Windows drive while before it was always the first drive from the left. Mais78 Ive got exactly the same issue now but in 2020 with Mac OS Catalina 10.15.6.
What Is Mac Recovery Mode and When to Use It?
macOS Recovery mode, also known as Recovery Partition, is part of the built-in recovery system of your Mac. You can start up from macOS Recovery and use its utilities to diagnose disk problems, recover and restore data from Time Machine, re-install macOS, get help online, fix and wipe the data on the hard disk, and more.
Here's when you might need to use different Recovery mode utilities:
Reinstall macOS, to restore macOS to its original factory state.
Restore from a Time Machine backup.
Set a firmware password on your Mac, for additional security.
Access Disk Utility, to repair or erase your start up disk.
Wipe all your personal data when you're selling or giving away your Mac.
How to Boot Mac in Recovery Mode?
There are 3 key combinations to start your Mac in Recovery Mode. The Reinstall macOS utility installs different versions of macOS depending on which one you use.
Bonus: How to Recover Lost Data After Booting Mac
1Boot Mac in Recovery Mode (Standard Mode)
This is the recommended option. This ensures that the installation isn't associated with your Apple ID, which is important if you're selling or giving away your Mac.
1. Shutdown your Mac.
2. Turn on your Mac and immediately press and hold: Command - R, holding until you see the Apple logo or a spinning globe.
To quit Recovery, click on Restart or Shut Down in the menu. In the case where you need to start with a different startup disk, pick the option Startup Disk from the Apple menu.
2Boot into Recovery Mode on Mac over the Internet
To launch Internet Recovery, you'll need an Internet connection. Please make sure your Mac is connected to Wi-Fi before booting your Mac into Internet Recovery mode. Here you have two options:
A - Upgrade or Install the Latest macOS
1. Reboot your Mac first.
2. Then turn on your Mac and immediately press and hold: Option - Command - R, holding until you see a spinning globe. At this point, your mac is successfully booting in recovery mode.
B - Downgrade or Install the macOS that Came with Your Mac
This option is nearly the same as the above one. What is different is the key pressed and held should be Shift - Option - Command - R.
To quit Recovery, choose Restart or Shut Down from the Apple menu.
The Difference between Standard and Internet Recovery Mode
The Recovery utility enables you to reinstall the Mac operating system. So why would you choose one option over another? It really depends on your issue, and what version of macOS you need:
The Standard Recovery mode reinstalls the version of macOS that was last installed on your Mac, taking the Installer image file from your Mac's local recovery partition.
The Internet Recovery mode connects to Apple servers, checks for any hardware issues, and downloads either the version that came with your computer at the time of purchase, or the latest compatible one (depending on which key combination you choose).
Note that if your local partition is somehow damaged, your Mac will automatically revert to Internet Recovery mode.
Bonus: How to Recover Lost Data After Booting Mac
Lost or accidentally deleted your family pictures, or other important data? If you are looking to recover lost data, but you don’t have a backup and you lost them because of the recovery mode. Then you will need the help of AnyRecover for Mac. Whether the system crashed, or you emptied your Trash, unintentionally deleted a partition, or fell victim to a virus attack - there are ways to recover all those important files.
Features of AnyRecover
Recover from Everywhere. Getting important data back from any storage space, such as hard drive, flash drive, sd card, digital camera and more.
Recover All Formats. Recovering any formats of files, including photos, videos, audios, emails, documents, etc.
No Matter How You Lost. It can restore lost files from recovery mode on Mac along with other data loss scenarios, including system crashed, accident deleted, formatted device, etc.
Fully compatible with all Mac operating systems, and most file systems, such as APFS, HFS+, HFS X, exFAT, etc.
Restart Os X In Recovery Mode Mac
Steps about recovering lost files after booting Mac into recovery mode:
Step 1: First, Launch the software. Select the drive from where the data files are lost, then start scanning by clicking 'Start' button.
Step 2: The software will will run an all-around scan on your drive to identify the deleted, hidden or lost files
Step 3: When the scan completes, the files will be listed on the screen. Finally, tap on Recover option and the files will be restored on your drive.
Recovery Mode Mac
As you can see, it's quite simple and also completely safe: your data stays on your drive, doesn't get uploaded anywhere, and you recover it yourself without anyone else viewing your data.